foofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofooairporthospitalsindustrylogisticsretailArtboardempowermentinnovationbrochureproductpassionproductsrespectteamworkArtboard@2xwhitepaperwiring-diagramsfacebookinstagramlinkedintwitteryoutubearrowarrow-redux-bigarrow-redux-toparrow-redux-toparrow-reduxarrowArtboard@2xcountrydownloadeyefile2filtergridhamburgerlanguagelistnopdfphoneplusresetsearchsubscribevideoyesArtboard@2x

1SAFE

Opening & safety sensor for all types of automatic doors
Technology Active Infrared
Colours:
1safe opening & safety sensor for automatic doors

Description

The 1 SAFE is an active infrared sensor operating with background suppression (triangulation). At 2,20 m mounting height, the 1 SAFE emits an infrared beam of 35 x 70 mm and is therefore suitable for all applications where accurate and narrow detection fields are required. It either opens, protects or monitors.

Features

Reliable & accurate

The main feature of the 1 SAFE is its ability to track changes in its
background and environment, which ensures a greater reliability in all situations.

Universal

The 1SAFE provides safety on sliding doors during the opening cycle, on curved sliding or swing doors during the closing cycle and on revolving doors to secure the pinch zone.

Small detection field

The 1 SAFE, as an alternative to push buttons, opens an automatic
door when you need a very small detection field (kitchen doors, internal train doors, etc).

Automatic or manual mode

For the most common applications and installation heights, a single press on the control button is enough. The sensing area is adjusted automatically. For special applications (greater height, reflective floors, horizontal applications, etc.), a “manual mode” using an adjusting screw and dip-switch enables precise adjustments of the sensing
area.

Table of specifications

Technology:

active infrared

 

Detection mode:

presence detection by distance measurement

 

Detection field:

35 mm x 70 mm (at 2.2 m mounting height)

 

LED-signal:

red LED: is ON during detection - orange LED flashes 1x after power on

 

Response time:

64 ms

 

Mounting height:

0.6 m - 3 m

 

Supply voltage:

12 V - 24 V AC/DC -5% / + 10%

 

Mains frequency:

50 - 60 Hz

 

Max. current consumption:

120 mA @ 24 V AC / 80 mA @ 24 V DC

 

Standard output:
Max. contact voltage:
Max. contact current:
Max. switching power:

relay (free of potential contact)
42 V AC/DC
1 A (resistive)
30 W (DC) / 42 VA (AC)

 

Monitoring input:
Max. contact voltage:
Voltage threshold:

1 optocoupler (free of potential contact)
30 V
High state: >10 V - Low state: <1 V

 

Hold time:

0.5 s

 

Reflectivity:

min. 10% at IR-wavelength of 850 nm

 

Temperature range:

-25°C - +55°C; 0-95% rel. humidity, non condensing

 

Degree of protection:

IP53

 

Dimensions:

145 mm (L) x 40 mm (H) x 50 mm (D)

 

Housing material:

ABS (black)

 

Norm conformity:

EN 61000-6-2; EN 61000-6-3; EN 50581; EN ISO 13849-1 Performance Level «c» CAT. 2
(under the condition that the door control system monitors the sensor at least once per door cycle)

 

Specifications are subject to changes without prior notice – Measured in specific conditions.

Versions
  • 1safe opening & safety sensor for automatic doors
    1SAFE

    1SAFE sensor

  • 1SAFE Surface Mounting Accessory
    Kit 1SAFE + SMA

    1SAFE + accessory for surface mounting

  • 1safe-ba bracket accessory
    Kit 1SAFE + BA

    1SAFE + mounting bracket

Accessories
Downloads
need more information Contact us