foofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofooairporthospitalsindustrylogisticsretailArtboardempowermentinnovationbrochureproductpassionproductsrespectteamworkArtboard@2xwhitepaperwiring-diagramsfacebookinstagramlinkedintwitteryoutubearrowarrow-redux-bigarrow-redux-toparrow-redux-toparrow-reduxarrowArtboard@2xcountrydownloadeyefile2filtergridhamburgerlanguagelistnopdfphoneplusresetsearchsubscribevideoyesArtboard@2x

EAGLE

Opening sensor for all types of automatic doors
Technology Radar
Colours:
Eagle

Description

The EAGLE  is a microwave sensor which can be mounted on all types of automatic doors, irrespective of the surroundings. The EAGLE ONE is a unidirectional motion sensor for standard automatic doors. The EAGLE ONE HM can be used for high mounting up to 5 m. The EAGLE THREE-N is a unidirectional motion sensor specially designed for self-monitored escapre route doors. Configuration of parameters is flexible and easy via the remote control or push buttons.

Features

Stability & reliability

Thanks to the BEA planar antenna and its unidirectional detection mode, the EAGLE offers an high level of stability and reliability.

Energy-saving

Improvement of the energy efficiency of buildings thanks to the unidirectional radar, which detects approaching movements and filters out movements moving away: the door closes earlier and reduces heat loss.

Flexibility

The size and shape of the detection fields can be adapted according to your environment and application.

Alternative mounting possibilites

Possibility to mount the sensor in the floor or in the ceiling. When placed above the hinges of a swing door, the sensors ignores the closing movement of the doors.

Detection field
Table of specifications
EAGLE ONE EAGLE THREE-N

Technology

microwave and microprocessor

 

Transmitter frequency

24.150 GHz

 

Transmitter radiated power

< 20 dBm EIRP

 

Transmitter power density

< 5 mW/cm²

 

Detection mode

motion

 

Min. detection speed

5 cm/s

 

Supply voltage

12V to 24V AC ±10%; 12V to 24V DC +30% / -10%

 

Mains frequency

50 to 60 Hz

 

Max power consumption

< 2 W

 

Output

relay (free of potential change-over contact)
Max. contact voltage: 42V AC/DC
Max. contact current: 1A (resistive)
Max. switching power: 30W (DC) / 42VA (AC)

In no detection status (current source ON)
Max. open-circuit voltage : 6.5V
Output voltage available at 10mA: 3V min.
Typical load: up to 3 optocouplers connected in series, free of potential

Mounting height

EAGLE ONE: from 1.8 m to 4 m;
EAGLE ONE HM: from 4 m to 5 m

from 1.8 m to 4 m

Degree of protection

IP54

 

Temperature range

from -20 °C to + 55 °C

 

Dimensions

120 mm (L) x 80 mm (H) x 50 mm (W)

 

Tilt angles

0° to 90° vertical; -30° to +30° lateral

 

Material

ABS

 

Weight

215 g

 

Cable lenght

2.5 m

 

Norm conformity

EN 300 440-2 V1.4.1, EN 301 489-1 V1.9.2, EN 301 489-3 V1.6.1, EN 62311, EN 62479

 

Specifications are subject to changes without prior notice – Measured in specific conditions.

Versions
  • Eagle
    EAGLE ONE

    unidirectional sensor for all types of doors

  • Eagle
    EAGLE ONE HM

    unidirectional sensor for high mounting

  • Eagle
    EAGLE THREE-N

    unidirectional sensor for escapre route doors

Accessories
Downloads
need more information Contact us