foofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofooairporthospitalsindustrylogisticsretailArtboardempowermentinnovationbrochureproductpassionproductsrespectteamworkwhitepaperwiring-diagramsfacebookinstagramlinkedintwitteryoutubearrowarrow-redux-bigarrow-redux-toparrow-redux-toparrow-reduxarrowcountrydownloadeyefile2filtergridhamburgerlanguagelistnopdfphoneplusresetsearchsubscribevideoyes

IXIO-D

Opening and safety sensor for automatic sliding doors
Technology Radar & Active Infrared
Colours:
ixio-d for industrial doors

Description

The IXIO-D is a sensor which combines radar technology for the activation of the door and infrared technology for the user protection. The unidirectional radar enables energy savings to be made. The three-dimensional infrared curtain protects people from any contact with the doors. Thanks to the LCD screen and the BEA DECODER app sensor configuration has never been easier.

Features

Energy-saving

Due to the unidirectionality, the duration of the door opening cycle is shorter, which reduces heat loss from the building and saves energy. This also optimises the “airlock” function.

Intuitive configuration

Intuitive configuration with an LCD screen displaying texts and symbols (LCD graphics). Quick & easy overview of all settings via the BEA decoder app.

Visual aids

4 red spotlights visible on the floor to adjust the angle of the failsafe curtain.

Stable & reliable

A 32-bit microprocessor optimises the processing of information coming from the environment, ensuring a stable performance throughout the year. 48 high-density infrared spotlights from 2 curtains protect users from any contact with the doors.

Table of specifications

Supply voltage:

12 V - 24 V AC +/-10% ; 12 V - 30 V DC +/-10% (to be operated from SELV compatible power supplies only)

 

Power consumption:

< 2.5 W

 

Mounting height:

2 m to 3.5 m (local regulations may have an impact on the acceptable mounting height)

 

Temperature range:

-25°C to +55°C; 0-95% relative humidity, non condensing

 

Degree of protection:

IP54

 

Noise:

< 70 dB

 

Expected lifetime:

20 years

 

Detection mode:

Motion
Min. detection speed: 5 cm/s

Presence
Typical response time: < 200 ms (max. 500 ms)

Technology:

Microwave doppler radar
Transmitter frequency: 24.150 GHz
Transmitter radiated power: < 20 dBm EIRP Transmitter power density: < 5 mW/cm2

Active infrared with background analysis
Spot: 5 cm x 5 cm (typ)
Number of spots: max. 24 per curtain
Number of curtains: 2

Output:

IXIO-DT1/-DP1
Solid-state-relay (potential and polarity free)
Max. contact current: 100 mA
Max. contact voltage: 42 V AC/DC

IXIO-DT3/DP3
Solid-state-relay (potential and polarity free)
Max. contact current: 100 mA
Max. contact voltage: 42 V AC/DC
In switching mode: NO/NC
In frequency mode: pulsed signal
(f= 100 Hz +/- 10%)
Galvanically isolated current source
No detection: current source ON
Open circuit voltage: 6.5 V
Output voltage available at 10 mA: 3 V min.
Typical load: up to 3 optocouplers in series
Detection: current source OFF
Open-circuit remained voltage: < 500 mV

IXIO-DT3/-DT1
Solid-state-relay (potential and polarity free)
Max. contact current: 100 mA
Max. contact voltage: 42 V AC/DC
Holdtime: 0.3 to 1 s

IXIO-DP3/-DP1
Pulse polarity: negative
Level:
- Standby: Pulse from V to ground
- Detection: V Supply
Topology: op-collector with 4.7 K to 3.3 V
Max. sink current: 25 mA with external 1 K to 24 V

Input:

 

IXIO-DP3/-DP1
Pulse polarity: positive or negative (adjustable)
Impedance:
- Positive pulse: 2 K to ground
- Negative pulse: 470 R to + sensor power supply
Pulse voltage: 6 V to 30 V
Pulse duration: 4 μs to 500 μs
Duty cycle: max. 50%

Test input:

 

IXIO-DT3/-DT1
Sensitivity: Low: < 1 V; High: > 10 V (max. 30 V) Response time on test request: typical: < 5 ms

Norm conformity:

IXIO-DT3/DP3
EN 12978, EN ISO 13849-1:2008 PL «d» CAT. 2; EN 16005:2012 Chapter 4.6.8; DIN 18650-1:2010 Chapter 5.7.4; AutSchR; BS 7036-1:1996 Chapter 7.3.2 (only applicable for relay output in frequency mode and current source output)

EN 12978, EN ISO 13849-1:2008 PL «d» CAT. 2 (under the condition that the door control system monitors the sensor at least once per door cycle); IEC 61496-1:2012 ESPE Type 2; EN 16005:2012 Chapter 4.6.8; DIN 18650-1:2010 Chapter 5.7.4; AutSchR; BS 7036-1:1996 Chapter 7.3.2

Specifications are subject to changes without prior notice – Measured in specific conditions.

Versions
  • ixio-d for industrial doors
    IXIO-DT3

    sensor with external monitoring for emergency exits

  • ixio-d for industrial doors
    IXIO-DT1

    sensor with external monitoring

  • ixio-d for industrial doors
    IXIO-DP3

    sensor with external monitoring for emergency exits with pulsed safety door controls

  • ixio-d for industrial doors
    IXIO-DP1

    sensor with external monitoring for pulsed safety door controls

Accessories
BEA DECODER APP

android  app-store

Videos
Downloads
need more information Contact us