foofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofooairporthospitalsindustrylogisticsretailArtboardempowermentinnovationbrochureproductpassionproductsrespectteamworkwhitepaperwiring-diagramsfacebookinstagramlinkedintwitteryoutubearrowarrow-redux-bigarrow-redux-toparrow-redux-toparrow-reduxarrowcountrydownloadeyefile2filtergridhamburgerlanguagelistnopdfphoneplusresetsearchsubscribevideoyes

LZR®-FLATSCAN SW

Safety sensor for swing doors
Technology Laser
Colours:
FLATSCAN SW

Description

The easy-to-install FLATSCAN SW uses time-of-flight laser technology for swing doors to generates 170 measurement points that provide a complete protection for swing doors and their users. A single FLATSCAN SW covers the entire door wing including the hinge area. Discover our product web page dedicated to the Flatscan SW

Features

Compact design

The FLATSCAN SW can be used on any size of swing door. Thanks to its compact
design (8.5 cm × 14.2 cm) it can be stocked and stored easily.

Independent of floor and surroundings

Laser technology guarantees independence of all type of flooring (slatted floors, wire mesh, absorbent carpet, reflective flooring, slippery surface, etc.) and the direct surroundings of the door (handrail, walls, radiators, dustbins, etc.).

Pinch zone safety

The FLATSCAN SW covers the hinge area of a door to protect hands and fingers during the closing process. It counts 100 points, divided over 16° in the pinch zone.

Fast & intuitive installation

The size of the sensor area is defined by hand movement. Products do not have to be cut anymore to fit the doorframe.

Table of specifications

Technology

LASER scanner, time-of-flight measurement

 

Detection mode

Presence

 

Max. detection range

4 m (diagonal) with reflectivity of 2% (i.e. : at W = 1.5m -> max. H = 3.7 m)

 

Opening angle

Door wing safety: 90° / Pinch zone safety: 16°

 

Angular resolution

Door wing safety: 1.3°/ Pinch zone safety: 0.2°

 

Typ. min. object size

Door wing safety: 10 cm @ 4m (in proportion to object distance, DIP 2 = ON)
Pinch zone safety: 2 cm @ 4m (in proportion to object distance, DIP 2 = ON

 

Testbody

700 mm × 300 mm × 200 mm (testbody CA according to EN 16005 & DIN 18650)

 

Emission characteristics

IR LASER: Wavelength 905 nm; max. output pulse power 25 W; Class 1

 

Supply voltage

12 - 24 V DC ± 15 %

 

Power consumption

≤ 2 W

 

Response time

Door wing safety: max. 50 ms / Pinch zone safety: max. 90 ms

 

Output
Max. switching voltage
Max. switching current

2 electronic relays (galvanic isolation - polarity free)
42V AC/DC
100 mA

 

LED-signals

1 bi-coloured LED: detection/output status

 

Dimensions

142 mm (L) × 85 mm (H) × 33 mm (D) ( mounting bracket + 7 mm )

 

Material - Colour

PC/ASA - Black - Aluminium - White

 

Tilt angles

+2° à +10° (without mounting bracket)

 

Protection degree

IP54 (EN 60529)

 

Temperature range

-30°C to +60°C if powered

 

Humidity

0-95 % non-condensing

 

Vibrations

< 2 G

 

Min. door wing speed

2°/sec

 

Norm conformity

EN 12978; EN ISO 13849-1 Pl “d”/ CAT2; IEC 60825-1; EN 60950-1; EN 61000-6-2; EN 61000-6-3; EN 62061 SIL 2; DIN 18650-1 Chapter 5.7.4 (testbody CA); EN 16005 Chapter 4.6.8 (testbody CA)

 

Specifications are subject to changes without prior notice – Measured in specific conditions.

Versions
  • FLATSCAN SW
    LZR®-FLATSCAN SW kit left+right

    LZR®-FLATSCAN SW kit left+right

  • FLATSCAN SW
    LZR®-FLATSCAN SW left

    LZR®-FLATSCAN SW left

  • FLATSCAN SW
    LZR®-FLATSCAN SW right

    LZR®-FLATSCAN SW right

Accessories
Installation
Videos
Downloads
need more information Contact us